DIY Crafts – How to Make Coffee Tree – Home Decor !

0
143

DIY Crafts – How to Make Coffee Tree – Home Decor !

In this master class, I’ll show you a step by step description and photos, how to make a coffee tree with his own hands at home. It may seem that the tree is difficult to make, but I’ll show you an example of this lesson, it is quite feasible and not too difficult. But it is a great decoration for your home or a gift for your loved ones.

Coffee tree with his own hands the main

We need:

– The basis for the bead tree (trunk);
– Coffee beans 50 oz .;
– Beads 100 gr .;
– Copper wire;
– Cutters;
– Pliers;
– Scissors;
– Paper towels (toilet paper);
– PVA glue;
– Acrylic paints (gouache).

Coffee tree with his hands 1

On the wire strung beads.

Coffee tree with his hands 2

Stepping back from the edge of the wire 10 cm reckon 9 beads.

Coffee tree with their hands 3

Form a loop.

Coffee tree with his hands 4

Make a loop of 5-6 turns to get the leg.

Coffee tree with their hands 5

Retreat 1 cm and without bending the wire beads and make an empty loop. Here then we will strengthen the coffee seed.

Coffee tree with your hands 6

Coffee tree with their hands 7

We now move on to the next leaves. Beads are counted back down from the previous 1.5 cm leaf legs and do the loop again with a twisted leg.

Coffee tree with his hands 8

Coffee tree with their hands 9

Continue to alternate leaves and empty tabs. You can do more leaves or vice versa more empty seats under the coffee. It all depends on your desire.

Coffee tree with his hands 10

We will have a small tree, so that we need stubby twigs. Some will be on 9 leaves, while others on the 7. After reaching vershinki branches (up to 5 leaf, in short it will be a 4 leaf) we turn and continue to make for the second side branches.

Coffee tree with his hands 11

Coffee tree with his hands 12

Moving down the branches are now as alternating leaves and empty tabs.

Coffee tree with his hands 13

Finished with leaf twist midway connecting both sides of the branches of a single stem.

Coffee tree with his hands 14

Coffee tree with his hands 15

Combining first and last leaf leave the tip of the wire 10 cm and cut off.

Coffee tree with his hands 16

Both ends of the wire are twisted, making our twigs twig for subsequent attachment to the sapling.

Coffee tree with his hands 17

We will need to tree branches with leaves 7 and 9 leaves. The longer we do not need because we have a small tree.

Coffee tree with his hands 18

Now take each branch and loops with little leaves pressed to the middle, to make it more like a twig.

Coffee tree with his hands 19

Prepare the coffee grains. We select the closest size.

Coffee tree with his hands 20

We smear one of the seeds and give a little glue to dry.

Coffee tree with his hands 21

We enclose with ley seed under an empty loop and apply the second seed. Presses and hold for 3-4 seconds.

Coffee tree with his hands 22

Coffee tree with his hands 23

Continue to do so with all the empty loop. Transform them into the coffee grains.

Coffee tree with his hands 24

By preparing coffee twig: his short, we need – 40 pcs, we need dlinnenkih – 50 pcs.

Coffee tree with his hands 25

Take 3 stubby branches and twisting them together legs. It turns a fluffy bundle of twigs.

Coffee tree with his hands 26

Coffee tree with his hands 27

Coffee tree with his hands 28

We fasten our first bundle to the very top of the tree. Wrap the leg and trunk wire.

Coffee tree with his hands 29

Make 3 more bundles of short branches. All three attach the second row from the top retreating 1.5 – 2 cm.

Coffee tree with his hands 30

Coffee tree with his hands 31

Go to the next branch. Getting mounted on the tip of a bunch of 3 short branches.

Coffee tree with his hands 32

Stepping back from the first leg 2 cm, 2 ligaments attach short branches. This thread is over.

Coffee tree with his hands 33

We begin to make out a bunch of other branch. Again, take a bunch of short branches. Is mounted on the tip of a branch.

Coffee tree with his hands 34

Take 2 bundle of short twigs, back down to 2 cm. From the already attached ligaments, secured with wire. Another branch is ready.

Coffee tree with his hands 35

Go to the lower branches. Again, is mounted on the tip of a bunch of 3 short branches. Now we use the short cords only on the tips of the branches, do the following bundles of 9 sheet.

Coffee tree with his hands 36

We begin to use long cords. Take three long branches curl their legs. The result was a bunch. Retreat from attached branches 2 cm. Long and fasten 2 sprigs of the bunch.

Coffee tree with his hands 37

Retreat still 2 cm and fasten these two bundles of long branches. Another branch is ready.

Coffee tree with his hands 38

We continue to attach the remaining cords on the bare branches. Repeat all the steps to fasten the tip of a bunch of 3 short branches. Retreat 2 cm 2 and fasten bundles of long branches back down to 2 cm and fasten these two bundles of long branches. All branches are filled.

Coffee tree with his hands 39

Coffee tree with his hands 40

Now we have to wrap all branches strips of paper towel. We start with the side branches.

Coffee tree with his hands 41

Coffee tree with his hands 42

We go back to the top of the winding and the entire trunk.

Coffee tree with his hands 43

Coffee tree with his hands 44

Take the paint, mix it with water and PVA glue, and begin to paint all wrapped threads. Give dry. Now you only have to stretch all the twigs and leaves.

Coffee tree with his hands 45

Here is the tree we have.

Coffee tree with his hands 46

If you take more trunk, the tree and get bigger. Do not forget to branches and will need much more.

Coffee tree with his hands 47

Coffee tree with his hands 48

LEAVE A REPLY